Endless Display Cases With Semi-Self-Contained Refrigeration
Endless display cases with semi-self-contained refrigeration systems provide quick and easy installation in areas where space is limited and roof access isn’t practical.
While installation requires some electrical and system set-up, these systems are designed to be operational
faster than remote systems.
The refrigeration system consists of a condensing unit mounted on top of the case with the evaporator coil mounted in the merchandiser’s base. The condensing unit is covered by a 20″ tall steel shroud that ships with each case. The condensing unit is also covered with a sound dampening fiberglass mat to reduce the noise level inside your store.
- Base mounted evaporator coil allows premium merchandising space at the top
- 30″ wide glass doors with an additional 200+ square inches of viewing area per door
- 23″ deep shelves for maximum pack-out space
- 100% of pack-out space falls within the visible merchandising area so customers see all your products
- Front air curtain prevents warm, moist air from entering the merchandiser during door openings for the most energy efficient design
- LED lights are more energy efficient with more lumens per watt while also maximizing product appearance
Available products, click on image for additional product information.
Endless Glass Door Freezer
- Length: 153-5/16 (3900 mm)*
- Depth: 40-3/8 (1026 mm)**
- Height: 102 (2591 mm)***
- 120V Lights Amps: 0.75
- 120V Heater Amps: 2.32
- 120V Fan Amps: 1.0
- Number of Doors: 5
- Door Width: 30″
- Number of Shelves: 25
- Product Facing SqFt: 69.7
- Weight (lbs): 2113
- Weight (KG): 960
- Refrigerant: R-448A/R449A
• Flexible refrigerant line-sets on self-contained models for easier installation
- Anti-fog film on low temp Thermoseal® glass doors (factory applied) keeps doors clear even after opening
*Add 2-1/2″ (64 mm) to length for each end or insulated partition. Also allow an additional 1″ clearance for case and assembly dimensional tolerance stack-up.
**Depth includes end panels, door handles and required rear piping stand-offs.
***Height Includes removable skid runner for installation purposes. Without runner – 79-3/4″H. Height also includes 20″ tall overhead shroud.
Click on link below to download.