Split-Pak™ Legacy Remote Systems with R-449A

• DOE and SNAP compliant
• Range from 1/2 to 15 H.P.
• Compliant, energy efficient scroll compressors featured exclusively in low temp units for added reliability
• With or without matching evaporator coils
• Factory assembled on a galvanized steel angle leg base.
• Generously-sized condenser for dependable performance
• Pre-piping kit including sight glass
• Pre-wiring kit
• Preset non-adjustable high and low pressure controls for medium temp units. Non-adjustable high and adjustable low pressure controls for low temp.
• Crankcase heater
• Head pressure control valve ensures proper operation in low ambient conditions
• Suction service valve
• Heavy-duty galvanized steel base
• Liquid line filter/drier
• Pre-wired electrical control panel
• Compressor contactor
• Defrost heater contactor (when required)
• Rifled tubes in condenser add efficiency
• PSC condenser fan motors
• Large liquid receiver (for max. 100 ft. line run)
• One year limited compressor warranty (optional four year extended warranty available)

• Special voltages
• Insulated and heated receiver (thermostatically controlled)
• Suction accumulator (shipped loose)
• Coated condenser coils
• Oil separator
• Phase loss/low voltage monitor
• Factory pre-assembled evaporator coil (includes factory pre-mounting of thermostatic air control and expansion valve)
• Factory pre-charged system for 5 HP and under with quick connect liquid and suction line sets up to 50 ft. (specify length when ordering)
• Adjustable low pressure control for medium and high temp units
• Dual pressure control (adjustable)
• Circuit breaker
• Suction filter
• Fan cycling switch
• Pre-mounted solenoid at evaporator
• Liquid line solenoid valve (shipped loose)
• Heavy-duty rack base
• Extended four year limited compressor warranty

• Properly sized expansion valve
• Room thermostat
• Energy efficient EC motors on single phase coils
• Electric defrost models feature defrost termination/fan delay controls and drain line heaters
• Standard voltages: 115/60/1 (medium and high temp air defrost models), 208-230/60/1 and 208-230/60/3

• Thermostatic expansion valve (TXV) and thermostat shipped loose
• TXV installed, thermostat mounted
• TXV installed and thermostat mounted, liquid line suction valve mounted and wired
• Energy saving LogiTemp® electronic controller system (standard on freezer applications 6 H.P. and above)
• LogiTemp® Plus electronic controller system with Reverse Cycle Defrost

Click or tap here for condensing unit and evaporator coil spec sheets.