Endless Display Cases With Remote Refrigeration

Endless display cases with remote refrigeration systems reduce heat and noise on the sales floor and are preferred in areas where the refrigeration system may be installed on a roof.

Base mounted evaporator coil increases air flow efficiency and allows premium merchandising space at the top of the case
Refrigeration system includes condensing unit with all necessary components supplied for installation
30″ wide glass doors with an additional 200+ square inches of viewing area per door
23″ deep shelves for maximum pack-out space
100% of pack-out space falls within the visible merchandising area so customers see all your products
Front air curtain prevents warm, moist air from entering merchandiser during door openings for the most energy efficient design
Lights are more energy efficient with more lumens per watt while also maximizing product appearance

Request a Quote

BEM-2-30

62 (1581)*

40-3/8 (1026)**

81-7/8 (2080)***

10

120/208-230VAC/60/1****

Hardwire

BEM-3-30

92-7/16 (2354)*

40-3/8 (1026)**

81-7/8 (2080)***

15

120/208-230VAC/60/1****

Hardwire

BEM-4-30

122-7/8 (3102)*

40-3/8 (1026)**

81-7/8 (2080)***

20

120/208-230VAC/60/1****

Hardwire

BEM-5-30

153-5/16 (3900)*

40-3/8 (1026)**

81-7/8 (2080)***

25

120/208-230VAC/60/1****

Hardwire

BEL-2-30

62 (1581)*

40-3/8 (1026)**

81-7/8 (2080)***

10

120/208-230VAC/60/1****

Hardwire

BEL-3-30

92-7/16 (2354)*

40-3/8 (1026)**

81-7/8 (2080)***

15

120/208-230VAC/60/1****

Hardwire

BEL-4-30

122-7/8 (3102)*

40-3/8 (1026)**

81-7/8 (2080)***

20

120/208-230VAC/60/1****

Hardwire

BEL-5-30

153-5/16 (3900)*

40-3/8 (1026)**

81-7/8 (2080)***

25

120/208-230VAC/60/1****

Hardwire

*Add 2-1/2″ (64 mm) to length for each end or insulated partition. Also allow an additional 1″ clearance for case and assembly dimensional tolerance stack-up.
**Depth includes end panels, door handles and required rear piping stand-offs.
***Includes removable skid runner for installation purposes. Without runner: 79-3/4″H.
****120/208-230VAC/60/1 input circuit (requires 4-wire 208-230 service connection). If condensate evaporator pan accessory is used, it must be field installed and requires a dedicated 20 amp, 120 volt circuit.

Built to Last – Warranty to Prove It

Standard Two-Year Parts and Labor Warranty on Cabinet and Condensing Unit, Five-Year on Compressor Parts

Product Specifications

Master-Bilt® exclusive larger cu. ft. pack-out area
23″ deep shelves – deepest standard shelves available
Pack-out space and visible area are aligned for the ultimate in product merchandising
100% of pack-out space falls within the visible merchandising area
Additional 200+ square inches of viewing area per door
Front air curtain prevents warm, moist air from entering merchandiser during door openings for the most energy efficient design
Lights are more energy efficient with more lumens per watt while also maximizing product appearance
Front air screen blocks warm outside air and means fewer required defrosts and greater energy efficiency
Premium top merchandising space is made usable by moving the coil to the bottom of the case
Narrow footprint and shallow bumper for minimum intrusion into sales space
Strategic venting ensures proper air flow across product
Cam-locked panels on back, top and bottom for added strength and rigidity to the case
2-1/2″ thick back wall, bottom, ends and partitions meets or exceeds competitor models
Zero ODP insulation
30″ wide glass doors
EC fan motors are up to 65% more efficient than standard motors with less waste heat present inside the cold space
Flexible refrigerant line-sets on self-contained models for easier installation
UL and C-UL listed and UL EPH classified
Warranty: Two year limited parts and labor on cabinet with 18 months parts and labor on condensing unit (optional extended four year compressor warranties available)