Endless Display Cases With Semi-Self-Contained Refrigeration

Endless display cases with semi-self-contained refrigeration systems provide quick and easy installation in areas where space is limited and roof access isn’t practical.

While installation requires some electrical and system setup, these systems are designed to be operational faster than remote systems.

The refrigeration system consists of a condensing unit mounted on top of the case with the evaporator coil mounted in the merchandiser’s base. The condensing unit is covered by a 20″ tall steel shroud that ships with each case, and covered with a sound-dampening fiberglass mat to reduce the noise level inside your store.

Standard Features

Base-mounted evaporator coil allows premium merchandising space at the top
30″ wide glass doors with an additional 200+ square inches of viewing area per door
23″ deep shelves for maximum pack-out space
100% of pack-out space falls within the visible merchandising area so customers see all your products
Front air curtain prevents warm, moist air from entering the merchandiser during door openings for the most energy-efficient design
LED lights are more energy efficient with more lumens per watt while also maximizing product appearance

Request a Quote

BEM-2-30SC

62 (1581)*

40-3/8 (1026)**

81-7/8 (2080)***

10

208-230VAC/60/1****

Hardwire

BEM-3-30SC

92-7/16 (2354)*

40-3/8 (1026)**

81-7/8 (2080)***

15

208-230VAC/60/1****

Hardwire

BEM-4-30SC

122-7/8 (3102)*

40-3/8 (1026)**

81-7/8 (2080)***

20

208-230VAC/60/1****

Hardwire

BEM-5-30SC

153-5/16 (3900)*

40-3/8 (1026)**

81-7/8 (2080)***

25

208-230VAC/60/1****

Hardwire

BEL-2-30SC

62 (1581)*

40-3/8 (1026)**

81-7/8 (2080)***

10

208-230VAC/60/1****

Hardwire

BEL-3-30SC

92-7/16 (2354)*

40-3/8 (1026)**

81-7/8 (2080)***

15

208-230VAC/60/1****

Hardwire

BEL-4-30SC

122-7/8 (3102)*

40-3/8 (1026)**

81-7/8 (2080)***

20

208-230VAC/60/1****

Hardwire

BEL-5-30SC

153-5/16 (3900)*

40-3/8 (1026)**

81-7/8 (2080)***

25

208-230VAC/60/1****

Hardwire

*Add 2-1/2″ (64 mm) to length for each end or insulated partition. Also allow an additional 1″ clearance for case and assembly dimensional tolerance stack-up.
**Depth includes end panels, door handles and required rear piping stand-offs.
***Height Includes removable skid runner for installation purposes. Without runner – 79-3/4″H. Add 20″ for overhead shroud.
****208-230V 4-wire power supply required.

Built to Last – Warranty to Prove It

Standard Two-Year Parts and Labor Warranty on Cabinet and Condensing Unit, Five-Year on Compressor Parts

Product Specifications

Master-Bilt® exclusive larger cu. ft. pack-out area
23″ deep shelves – deepest standard shelves available
Pack-out space and visible area are aligned for the ultimate in product merchandising
100% of pack-out space falls within the visible merchandising area
Additional 200+ square inches of viewing area per door
Front air curtain prevents warm, moist air from entering merchandiser during door openings for the most energy efficient design
Lights are more energy efficient with more lumens per watt while also maximizing product appearance
Front air screen blocks warm outside air and means fewer required defrosts and greater energy efficiency
Premium top merchandising space is made usable by moving the coil to the bottom of the case
Narrow footprint and shallow bumper for minimum intrusion into sales space
Strategic venting ensures proper air flow across product
Cam-locked panels on back, top and bottom for added strength and rigidity to the case
2-1/2″ thick back wall, bottom, ends and partitions meets or exceeds competitor models
Zero ODP insulation
30″ wide glass doors
EC fan motors are up to 65% more efficient than standard motors with less waste heat present inside the cold space
Flexible refrigerant line-sets on self-contained models for easier installation
UL and C-UL listed and UL EPH classified
Warranty: Standard limited two year parts and labor on cabinet and condensing unit with five year coverage on compressor part